Company News
How to Replace an Ignition Coil on an Aircooled Vw (Volkswagen) Beetle
Views : 345
Update time : 2019-11-09 22:03:58
If the coil needs replacing, utilize a stock coil. The virgin time more spark than the stock coil can equip energy exist needed is when the mechanism has a same high compression ratio or extremely broad plug gap.
.
1) create certain the ignition key is switched off.
2) Unplug the thread that goes from the center of the coil to the distributor cap.
3) to create certain the wires don't obtain mixed up, utilize masking tape to tape together one aspect of the coils wires at a time. correspondence above a bit of composition if they came from the #1 (negative) or the #15 (positive) aspect of the coil. if the vehicle has customary points, the green thread chief from the aspect of the distributor will influence can to the negative aspect of the coil. if the vehicle has been equipped with a points replacement unit, electric ignition, the red thread from the aspect of the coil, will influence can to the certain aspect of the coil, and the black will influence can to the negative.
4) Loosen the two 10mm bolts that learn the coil mounting bracket onto the fan housing, and shift the coil.
5) The coil is held at the mounting bracket by a virgin bolt tightening the bracket to clamp the coil at place. Loosen this bolt sufficiently, and shift the old coil from the mounting bracket.
6) Install the new coil the identical method the old coil was removed, making certain that the negative and certain aspect of the coil look the identical method though the old coil.
7) Install the coil with it's mounting bracket to the fan shroud, and plug the wires back into the coil, double checking to create certain the negative and certain wires influence can to their respective terminals above the coil.
8) Reconnect the center coil thread from the distributor cap.
9) examination motivate the vehicle to create certain it operates properly.
Related News
Read More >>
